BE HL125F Manuel de service

CONTENTS Special Information 2 Maintenance 2 Packed Pumps 3 Mechanical Seal Pumps Stan

6. Place tapered installation sleeve (furnished with H, HL, K, KK, L, LQ and LL siz

10. Loosen the four setscrews over outer and inner end caps.

End cap must not be turned so far that lip seal drops

Mark valve and head before disassembly to insure proper reassembly. 1. Remove valve cap. 2. Measure and record length of extension of ad

PRESSURE ADJUSTMENT If a new spring is installed or if pressure setting of pressure relief valv

DANGER BEFORE OPENING ANY VIKING PUMP LIQUID CHAMBER (PUMPING CHAMBER, RESERVOIR, RELIE

3ITEM NAME OF PART ITEM NAME OF PART ITEM NAME OF PART ITEM NAME OF PART 1 Locknut 10 Packing Gland 19 Bracket Gask

41. Mark head and casing before disassembly to insure proper reassembly. The idler pin, which is offset in pum

5 3. Place packing retainer washer in bottom of packing chamber and pack pump with new packing. Us

Exploded View for Models G4125, H4125, HL4125, K4125, KK4125, L4125, LQ4125 and LL4125 (Model KK4125 shown) M

DISASSEMBLY DANGER BEFORE OPENING ANY VIKING PUMP LIQUID CHAMBER (PUMPING CHAMBER, RESE

Prior to installing rotating portion of mechanical seal, prepare and organ